Specifications

2-208

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

show dot11 associations

Use the show dot11 associations privileged EXEC command to display the radio association table, radio

association statistics, or to selectively display association information about all repeaters, all clients, a

specific client, or basic service clients.

show dot11 associations

Note The show dot11 associationss command shows only the first 15 characters of the association table. To

see the entire table use the show dot11 associations client command.,

Syntax Description

Defaults When parameters are not specified, this command displays the complete radio association table.

Command Modes Privileged EXEC

Command History

Usage Guidelines The data retrieved depends on the state of the device. If the station/wireless client is associated, the

following states are printed:

• EAP-Assoc

• MAC-Assoc

• Assoc

If the station/wireless client is not associated, the actual states are printed:

• Auth_notAssoc

• Wait ReAuth

client (Option) Displays all client devices associated with the access point

repeater (Option) Displays all repeater devices associated with the access point

statistics (Option) Displays access point association statistics for the radio interface

H.H.H (mac-address) (Option) Displays details about the client device with the specified MAC

address (in xxxx.xxxx.xxxx format)

bss-only (Option) Displays only the basic service set clients that are directly

associated with the access point

all-client (Option) Displays the status of all clients associated with the access point

cckm-statistics (Option) Displays fast, secure roaming (CCKM) latency statistics measured

at the access point for client devices using CCKM

Release Modification

12.2(4)JA This command was introduced.