Specifications

2-206
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
show dot11 adjacent-ap
show dot11 adjacent-ap
Use the show dot11 adjacent-ap privileged EXEC command to display the fast, secure roaming list of
access points that are adjacent to this access point. The WDS access point builds the adjacent access
point list based on data from client devices that support fast, secure roaming. This command works only
when you configure your wireless LAN for fast, secure roaming and there are client devices on your
wireless LAN that support fast, secure roaming.
show dot11 adjacent-ap
Note For this command to work, dot11network-map should be enabled
Note This command is not supported on bridges.
Defaults This command has no defaults.
Command Modes Privileged EXEC
Command History
Examples This example shows how to display the adjacent access point list:
AP# show dot11 adjacent-ap
This example shows a list of adjacent access points:
These are descriptions of the list columns:
• Radio—the interface number to which the client is currently associated
• Address—the MAC address of the adjacent access point from which the client device roamed
• Channel—the radio channel used by the adjacent access point
• Age (Hours)—the number of hours since a client roamed from the adjacent access point
• SSID—the SSID the client used to associate to the adjacent access point
Release Modification
12.2(11)JA This command was introduced.
Radio Address Channel Age(Hours) SSID
-------- ----------------------- ------------ ---------------- ----------
0 0007.50d5.8759 1 1 tsunami