Specifications

2-198
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
radius-server local
radius-server local
Use the radius-server local global configuration command to enable the access point as a local or
backup authenticator and to enter configuration mode for the local authenticator.
radius-server local
Note This command is not supported on bridges.
Defaults This command has no defaults.
Command Modes Global configuration
Command History
Examples This example shows how to enable the access point as a local or backup authenticator:
AP(config)# radius-server local
Related Commands
Release Modification
12.2(11)JA This command was introduced.
Command Description
group (local server configuration
mode)
Creates a user group on the local authenticator and enters
user group configuration mode
nas (local server configuration mode) Adds an access point to the list of NAS access points on the
local authenticator
show radius local-server statistics Displays statistics for a local authenticator access point
show running-config Displays the current access point operating configuration
user (local server configuration mode) Adds a user to the list of users allowed to authenticate to the
local authenticator