Specifications

2-9

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

admission-control (QOS Class interface configuration mode)

Use the admission-control QOS Class interface configuration mode command to require call admission

control (CAC) traffic for a radio interface. Use the no form of the command to remove the setting.

[no] admission-control

Note This command is not supported on c1200 and c1100 platforms.

Note This command is not supported when operating in repeater mode.

Syntax Description This command has no arguments or keywords.

Defaults This command has no defaults.

Command Modes QOS Class interface configuration mode

Command History

Examples This example shows how to configure CAC admission control as a requirement for the radio interface:

AP(config)# interface dot11radio 0

AP(config-if)# dot11 qos class voice

AP(config-if-qosclass)# admission-control

This example shows how to remove the CAC admission control requirement on the radio interface:

AP(config-if-qosclass)# no admission-control

Related Commands

Release Modification

12.3(8)JA This command was introduced.

Command Description

admit-traffic (QOS Class interface

configuration mode)

Specifies that CAC traffic is enabled for the radio interface.

cw-max (QOS Class interface

configuration mode)

Specifies the CAC maximum contention window size for the

radio interface.

cw-min (QOS Class interface

configuration mode)

Specifies the CAC minimum contention window size for the

radio interface.