Specifications

2-8

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

accounting (SSID configuration mode)

Use the accounting SSID configuration mode command to enable RADIUS accounting for the radio

interface (for the specified SSID). Use the no form of the command to disable accounting.

[no] accounting list-name

Syntax Description

Defaults This command has no defaults.

Command Modes SSID configuration interface

Command History

Usage Guidelines You create accounting lists using the aaa accounting command. These lists indirectly reference the

server where the accounting information is stored.

Examples This example shows how to enable RADIUS accounting and set the RADIUS server name:

AP(config-if-ssid)# accounting radius1

This example shows how to disable RADIUS accounting:

AP(config-if-ssid)# no accounting

Related Commands

list-name Specifies the name of an accounting list.

Release Modification

12.2(4)JA This command was introduced.

Command Description

ssid Specifies the SSID and enters the SSID configuration mode