Specifications

2-176

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

nas (local server configuration mode)

Use the nas local server configuration mode command to add an access point to the list of devices that

use the local authenticator.

nas ip-address key shared-key

Syntax Description

Defaults This command has no defaults.

Command Modes Local server configuration mode

Command History

Examples This example shows how to add an access point to the list of NAS access points on the local

authenticator:

AP(config-radsrv)# nas 10.91.6.158 key 110337

Related Commands

ip-address Specifies the IP address of the NAS access point

shared-key Specifies the shared key used to authenticate communication between

the local authenticator and other access points. You must enter this

shared key on the access points that use the local authenticator.

Release Modification

12.2(11)JA This command was introduced.

Command Description

group (local server configuration

mode)

Creates a user group on the local authenticator and enters user

group configuration mode

radius-server local Enables the access point as a local authenticator and enters

local server configuration mode

user (local server configuration

mode)

Adds a user to the list of users allowed to authenticate to the

local server