Specifications

2-175
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
multicast address (LBS configuration mode)
multicast address (LBS configuration mode)
Use the multicast address location based services (LBS) configuration mode command to specify the
multicast address that LBS tag devices use when they send LBS packets.
multicast address mac-address
Syntax Description
Defaults The default multicast address is 01:40:96:00:00:10.
Command History
Examples This example shows how to specify the multicast address used in the LBS profile:
ap(dot11-lbs)# multicast address 01.40.96.00.00.10
Related Commands
mac-address Specifies the multicast address that LBS tag devices use when they send LBS
packets.
Release Modification
12.3(4)JA This command was introduced.
Command Description
channel-match (LBS
configuration mode)
Specifies that the LBS packet sent by an LBS tag must match the radio
channel on which the access point receives the packet
dot11 lbs Creates an LBS profile and enters LBS configuration mode
interface dot11 (LBS
configuration mode)
Enables an LBS profile on a radio interface
method (LBS configuration
mode)
Specifies the location method used in an LBS profile
packet-type (LBS
configuration mode)
Specifies the LBS packet type accepted in an LBS profile
server-address (LBS
configuration mode)
Specifies the IP address of the location server on your network