Specifications

2-174
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
mobility network-id
mobility network-id
Use the mobility network-id SSID configuration mode command to associate an SSID to a Layer 3
mobility network ID. Use the no form of the command to disassociate the SSID from the mobility
network ID.
[no] mobility network-id network-id
Syntax Description
Defaults This command has no defaults.
Command Modes SSID configuration interface
Command History
Examples This example shows how to an SSID with a Layer 3 mobility network ID:
AP(config-if-ssid)# mobility network-id 7
This example shows how to reset the VLAN parameter to default values:
AP(config-if-ssid)# no mobility network-id
Related Commands
network-id Specifies the Layer 3 mobility network identification number for the
SSID
Release Modification
12.2(15)JA This command was introduced.
Command Description
ssid Specifies the SSID and enters the SSID configuration mode
wlccp authentication-server Enables Layer 3 mobility on the access point