Specifications

2-173
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
mobile station
Usage Guidelines This command can prevent data loss on a mobile workgroup bridge or bridge by ensuring that the bridge
roams to a new parent device before it loses its current association.
Examples This example shows how to specify that a bridge is a mobile station and sets the period and threshold to
20 seconds and -70 dBm:
BR(config-if)# mobile-station period 20 threshold -70
This example shows how to specify a scan for channels 1 and 6:
BR(config-if)# mobile-station scan 1 6
This example shows how to set a minimum rate of MCS rate index 15, below which the AP is rejected:
BR(config-if)# mobile-station minimum-rate m15
Related Commands
12.3(4)JA Support added for 1200 series access points in workgroup bridge mode.
12.4(3g)JA &
12.3(8)JEB
Added limited scanning and neighbor list manipulation. Support added for
1130, and 1240 access points.
12.4(25d)JA Added minimum-rate manipulation. Support added for access point in
workgroup bridge.
Release Modification
Command Description
show running-config Displays the current access point operating configuration