Specifications

2-167
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
mbssid
mbssid
Use the mbssid configuration interface command to enable multiple basic SSIDs on an access point
radio interface.
[no] mbssid
Note This command is supported only on radio interfaces that support multiple BSSIDs. To determine whether
a radio supports multiple BSSIDs, enter the show controllers radio_interface command. Multiple
BSSIDs are supported if the results include this line:
Number of supported simultaneous BSSID on radio_interface: 8
Syntax Description This command has no arguments or keywords.
Defaults This command is disabled by default.
Command Modes Configuration interface
Command History
Examples This example shows how to enable multiple BSSIDs on a radio interface:
ap(config-if)# mbssid
To enable multiple BSSIDs on all radio interfaces, use the dot11 mbssid global configuration command.
Related Commands
Release Modification
12.3(4)JA This command was introduced.
Command Description
dot11 mbssid Enables multiple BSSIDs on all radio interfaces that support
multiple BSSIDs
mbssid (SSID configuration mode) Specifies that a BSSID is included in beacons and specifies a
DTIM period for the BSSID
show dot11 bssid Displays configured BSSIDs