Specifications

2-166

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

max-associations (SSID configuration mode)

Use the max-associations SSID configuration mode command to configure the maximun number of

associations supported by the radio interface (for the specified SSID). Use the no form of the command

to reset the parameter to the default value.

[no] max-associations value

Syntax Description

Defaults This default maximum is 255.

Command Modes SSID configuration interface

Command History

Examples This example shows how to set the maximum number of associations to 5 on the wireless LAN for the

specified SSID:

AP(config-if-ssid)# max-associations 5

This example shows how to reset the maximum number of associations to the default value:

AP(config-if-ssid)# no max-associations

Related Commands

value Specifies the maximum number (1 to 255) of associations supported

Release Modification

12.2(4)JA This command was introduced.

Command Description

ssid Specifies the SSID and enters the SSID configuration mode