Specifications

2-162
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
logging buffered
logging buffered
Use the logging buffered global configuration command to begin logging of messages to an internal
buffer. Use the no form of this command to stop logging messages.
[no] logging buffered [size] [severity]
Syntax Description
Defaults This command has no defaults.
Command Modes Global configuration
Command History
Examples This example shows how to begin logging severity 3 messages to an internal 5000-byte buffer:
AP(config)# logging buffered 5000 3
This example shows how to stop the message logging:
AP(config)# no logging buffered
Related Commands
size Specifies the size of the internal buffer (4096 to 2147483647 bytes)
severity Specifies the message severity to log (1-7)
Severity 1: alerts
Severity 2: critical
Severity 3: errors
Severity 4: warnings
Severity 5: notifications
Severity 6: informational
Severity 7: debugging
Release Modification
12.2(4)JA This command was introduced.
Command Description
show logging Displays recent logging event headers or complete events
clear logging Clears logging status count and the trace buffer