Specifications

2-160
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
led display
led display
Use the led display global configuration command to reduce the brightness or to turn-off the Status LED
on the Cisco Aironet 1130AG access point. Use the no form of the command to return the Status LED
to full intensity operation.
[no] led display {off | dim}
Syntax Description
Defaults This command has no defaults.
Command Modes Global configuration
Command History
Examples This example shows how to reduce the brightness of the 1130AG Status LED:
AP(oonfig)# led display dim
This example shows how to turn-off the 1130AG Status LED:
AP(config)# led display off
This example shows how to turn-on the 1130AG Status LED.
AP(config)# no led display off
This example shows how to return the 1130AG Status LED to full brightness operation.
AP(config)# no led display dim
Related Commands
led flash
Use the led flash privileged EXEC command to start or stop the blinking of the LED indicators on the
access point for a specified number of seconds. Without arguments, this command blinks the LEDs
continuously.
off Turns-off the Status LED.
dim Reduces the brightness of the Status LED.
Release Modification
12.3(8)JA This command was introduced.
Command Description
show running-config Displays the contents of the currently running configuration file.