Specifications

2-155
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
interface dot11radio
interface dot11radio
Use the interface dot11radio global configuration command to place access point into the radio
configuration mode.
interface dot11radio interface-number
Syntax Description
Defaults The default radio interface number is 0.
Command Modes Global configuration
Command History
Examples This example shows how to place the access point into the radio configuration mode:
AP# interface dot11radio 0
Related Commands
interface-number Specifies the radio interface number (The 2.4-GHz radio is radio 0, and the
5-GHz radio is radio 1.)
Release Modification
12.2(4)JA This command was introduced.
Command Description
show interfaces dot11radio Displays the radio interface configuration and statistics