Specifications

2-142

Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges

0L-24115-01

Chapter 2 Cisco IOS Commands for Access Points and Bridges

group (local server configuration mode)

Use the group local server configuration mode command to enter user group configuration mode and

configure a user group to which you can assign shared settings. In user group configuration mode you

can specify settings for the user group such as VLAN and SSID.

group group

Note This command is not supported on bridges.

Syntax Description

Defaults This command has no defaults.

Command Modes Local server configuration mode

Command History

Examples This example shows how to create a user group on the local authenticator:

AP(config-radsrv)# group hoosiers

Related Commands

group Specifies the name of the user group

Release Modification

12.2(11)JA This command was introduced.

Command Description

nas (local server configuration

mode)

Adds an access point to the list of NAS access points on the

local authenticator

radius-server local Enables the access point as a local authenticator and enters

local server configuration mode

show running-config Displays the current access point operating configuration

user (local server configuration

mode)

Adds a user to the list of users allowed to authenticate to the

local authenticator