Specifications

2-141
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
fragment-threshold
fragment-threshold
Use the fragment-threshold configuration interface command to set the size at which packets are
fragmented. Use the no form of the command to reset the parameter to defaults.
[no] fragment-threshold 256-2346
Syntax Description
Defaults The default threshold is 2346 bytes
Command Modes Configuration interface
Command History
Examples This example shows how to set the packet fragment threshold size to 1800 bytes:
AP(config-if)# fragment-threshold 1800
This example shows how to reset the packet fragment threshold size to defaults:
AP(config-if)# no fragment-threshold
Related Commands
256-2346 Specifies the packet fragment threshold size (256 to 2346 bytes)
Release Modification
12.2(4)JA This command was introduced.
Command Description
show running-config Displays the current access point operating configuration