Specifications

2-129
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
eapfast authority
eapfast authority
Use the eapfast authority command to configure an EAP-FAST authority ID (AID) for a local
authenticator access point. The EAP-FAST AID identifies the server that authenticates the EAP-FAST
client. The local authenticator sends its AID to an authenticating client, and the client checks its database
for a matching AID. If the client does not recognize the AID, it requests a new Protected Access
Credential (PAC).
[no] eapfast authority {id identifier | info string}
Syntax Description
Defaults The default AID is LOCAL RADIUS SER.
Command Modes Configuration mode for local authenticators
Command History
Examples This example shows how to configure an AID for the local authenticator access point:
AP(config-radsrv)#eapfast authority id ap1200
This example shows how to configure an information string for the AID:
AP(config-radsrv)#eapfast authority id AP1200 A+G North
Related Commands
id identifier Specifies an authority identifier for the local authenticator access point.
Enter up to 32 hexadecimal digits for the AID.
info string Specifies an AID information string. The information string is not used
during EAP-FAST authentication, but it provides additional
information about the local authenticator. Enter up to 32 ASCII
characters.
Release Modification
12.3(2)JA This command was introduced.
Command Description
radius local-server pac-generate Generates a PAC file for an EAP-FAST client