Specifications

2-123
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
dot1x eap profile (configuration interface mode)
Usage Guidelines You must first configure an EAP profile before you can enable the profile on the fast Ethernet interface.
To configure an EAP profile, use the eap profile configuration command. To enable a preconfigured
EAP profile on the fast Ethernet interface, use the dot1x eap profile configuration interface command.
Examples This example shows how to enable the preconfigured EAP test profile on the fast Ethernet interface:
AP(config)# interface fastethernet 0
AP(config-if)# dot1x eap profile test
This example shows how to disable the EAP test profile on the fast Ethernet interface:
AP(config)# interface fastethernet 0
AP(config-if)# no dot1x eap profile test
Related Commands Command Description
eap profile Configures an EAP profile.
method (eap profile configuration mode) Specifies the method types for an EAP profile.
show eap registrations Displays EAP registrations for the access point.
show eap sessions Displays EAP statistics for the access point.