Specifications

2-120
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
dot11 wpa handshake init-delay
dot11 wpa handshake init-delay
Use the dot11 wpa handshake init-delay configuration command to introduce a delay to start the
four-way handshake in WPA PSK or dot1x. This command is applicable to an AP working in root or
bridge mode.
dot11 wpa handshake init-delay time
Syntax Description
Defaults The default timeout is 0 ms.
Command Modes Global configuration
Command History
Examples This example shows how to assign a delay to start the four-way handshake in WPA PSK or dot1x:
# dot11 wpa handshake init-delay 10
time Specifies the delay value. Valid range is from 0 ms to 10 ms.
Release Modification
12.4(25d)JA This command was introduced.