Specifications

2-118
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
dot11 update-group-key
Related Commands
dot11 update-group-key
Use the dot11 update-group-key privileged EXEC command to trigger an update of the WPA group
key. When you enter the command, the access point distributes a new WPA group key to authenticated
client devices.
dot11 interface-number update-group-key [vlan vlan-id]
Syntax Description
Defaults This command has no defaults.
Command Modes Privileged EXEC
Command History
Examples This example shows how to trigger a group key update on VLAN 2:
AP# dot11 d0 update-group-key vlan 2
Related Commands
Command Description
show running-config
ssid
Displays configuration details for SSIDs created in global configuration
mode
ssid Creates an SSID in configuration interface mode or assigns a globally
configured SSID to a specific radio interface
interface-number Specifies the radio interface number (the 2.4-GHz radio is radio 0; the
5-GHz radio is radio 1)
vlan-id Specifies the VLAN on which the access point sends out the group key
update
Release Modification
12.2(11)JA This command was introduced.
Command Description
authentication key-management Configures the radio interface (for a specified SSID) to
support authenticated key management