Specifications

2-115
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
dot11 priority-map avvid
dot11 priority-map avvid
Use the dot11 priority-map avvid global configuration command to enable or disable Cisco AVVID
(Architecture for Voice, Video and Integrated Data) priority mapping. AVVID priority mapping maps
Ethernet packets tagged as class of service 5 to class of service 6. This feature enables the access point
to apply the correct priority to voice packets for compatibility with Cisco AVVID networks. Use the no
form of this command to disable AVVID priority mapping.
[no] dot11 priority-map avvid
Note This command is not supported on bridges.
Syntax Description This command has no arguments or keywords.
Defaults AVVID priority mapping is enabled by default.
Command Modes Global configuration
Command History
Examples This example shows how to stop or disable AVVID priority mapping:
AP(config)# no dot11 priority-map avvid
This example shows how to enable AVVID priority mapping:
AP(config)# dot11 priority-map avvid
Related Commands
Release Modification
12.2(13)JA This command was introduced.
Command Description
class-map Creates a class map to be used for matching packets to the class whose name
you specify
show class-map Displays quality of service (QoS) class maps