Specifications

2-111
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
dot11 mbssid
dot11 mbssid
Use the dot11 mbssid global configuration command to enable multiple basic SSIDs on all access point
radio interfaces.
[no] dot11 mbssid
Note This command is supported only on access points that contain at least one radio interface that supports
multiple basic SSIDs. To determine whether a radio supports multiple basic SSIDs, enter the show
controllers radio_interface command. Multiple basic SSIDs are supported if the results include this
line:
Number of supported simultaneous BSSID on radio_interface: 8
Syntax Description This command has no arguments or keywords.
Defaults This command is disabled by default.
Command Modes Global configuration
Command History
Examples This example shows how to enable multiple basic SSIDs on all interfaces that support multiple basic
SSIDs:
ap(config)# dot11 mbssid
Related Commands
Release Modification
12.3(4)JA This command was introduced.
Command Description
mbssid (SSID configuration mode) Specifies that a BSSID is included in beacons and specifies a
DTIM period for the BSSID
show dot11 bssid Displays configured BSSIDs