Specifications

2-110
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
dot11 location isocc
dot11 location isocc
Use the dot11 location isocc global configuration command to configure location identifiers that the
access point sends with all RADIUS authentication and accounting requests.
dot11 location isocc ISO-country-code cc country-code ac area-code
Syntax Description
Defaults This command has no defaults.
Command Modes Global configuration
Command History
Usage Guidelines You can find a list of ISO and ITU country and area codes at the ISO and ITU websites. Cisco IOS
software does not check the validity of the country and area codes that you enter with this command.
Examples This example shows how to configure the ISO and ITU location codes on the access point:
ap(config)# dot11 location isocc us cc 1 ac 408
This example shows how the access point adds the SSID used by the client device and how it formats the
location-ID string:
isocc=us,cc=1,ac=408,network=ACMEWISP_NewarkAirport
Related Commands
isocc ISO-country-code Specifies the ISO country code that the access point includes in RADIUS
authentication and accounting requests
cc country-code Specifies the International Telecommunication Union (ITU) country code
that the access point includes in RADIUS authentication and accounting
requests
ac area-code Specifies the ITU area code that the access point includes in RADIUS
authentication and accounting requests
Release Modification
12.2(13)JA This command was introduced.
Command Description
snmp-server location Specifies the SNMP system location and the WISPr
location-name attribute