Specifications

2-107
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
dot11 lbs
dot11 lbs
Use the dot11 lbs global configuration command to create a location based services (LBS) profile and
to enter LBS configuration mode.
[no] dot11 lbs profile-name
Syntax Description
Defaults This command has no defaults.
Command Modes Global configuration
Command History
Examples This example shows how to create an LBS profile and enter LBS configuration mode:
ap(config)# dot11 lbs southside
Related Commands
profile-name Specifies the name of the LBS profile
Release Modification
12.3(4)JA This command was introduced.
Command Description
channel-match (LBS
configuration mode)
Specifies that the LBS packet sent by an LBS tag must match the radio
channel on which the access point receives the packet
interface dot11 (LBS
configuration mode)
Enables an LBS profile on a radio interface
method (LBS configuration
mode)
Specifies the location method used in an LBS profile
multicast address (LBS
configuration mode)
Specifies the multicast address that LBS tag devices use when they
send LBS packets
packet-type (LBS
configuration mode)
Specifies the LBS packet type accepted in an LBS profile
server-address (LBS
configuration mode)
Specifies the IP address of the location server on your network