Specifications

2-102
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
dot11 extension power native
dot11 extension power native
Use the dot11 extension power native configuration interface command to configure the native MIB
power table to be used to respond to SNMP queries on the access point power levels. This command
works with the cd11IfPhyNativePowerUseStandard MIB object of the Cisco DOT11-IF-MIB. Use the
no form of this command to use the standard MIB power table.
[no] dot11 extension power native
Syntax Description This command has no arguments or keywords.
Defaults The standard MIB power table is enabled by default.
Command Modes Configuration interface
Command History
Examples This example shows how to enable the native MIB power table for the radio interface:
AP(config-if)# dot11 extension power native
This example shows how to return to the standard MIB power table for the radio interface:
AP(config-if)# no dot11 extension power native
Related Commands
Release Modification
12.3(7)JA This command was introduced.
Command Description
show running-config Displays the current access point operating configuration