Specifications

2-101
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
dot11 extension aironet
dot11 extension aironet
Use the dot11 extension aironet configuration interface command to enable or disable Cisco Aironet
extensions to the IEEE 802.11b standard. Use the no form of this command to disable the Cisco Aironet
extensions.
[no] dot11 extension aironet
Note You cannot disable Cisco Aironet extensions on bridges.
Syntax Description This command has no arguments or keywords.
Defaults Cisco Aironet extensions are enabled by default.
Command Modes Configuration interface
Command History
Usage Guidelines The Cisco Aironet extensions help clients choose the best access point. You must enable these extensions
to use advanced features such as Cisco MIC and key hashing. Disable these extensions for non-Cisco
clients that misinterpret the extensions.
Examples This example shows how to enable Cisco Aironet extensions for the radio interface:
AP(config-if)# dot11 extension aironet
This example shows how to disable Cisco Aironet extensions for the radio interface:
AP(config-if)# no dot11 extension aironet
Related Commands
Release Modification
12.2(4)JA This command was introduced.
Command Description
show running-config Displays the current access point operating configuration