Specifications

2-95
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
dot11 adjacent-ap age-timeout
Related Commands
dot11 adjacent-ap age-timeout
Use the dot11 adjacent-ap age-timeout global configuration command to specify the number of hours
an inactive entry remains in the list of adjacent access points.
dot11 adjacent-ap age-timeout hours
Note This command is not supported on bridges.
Syntax Description
Defaults The default age-timeout is 24 hours.
Command Modes Global configuration
Command History
Examples This example shows how to configure the timeout setting for inactive entries in the adjacent access point
list:
AP# dot11 adjacent-ap age-timeout 12
Related Commands
Command Description
dot11 adjacent-ap
age-timeout
Specifies the number of hours an inactive entry remains in the list of
adjacent access points
show dot11 associations Display the radio association table, radio association statistics, or
association information about wireless devices
show dot11 network-map Displays the radio network map
hours Specifies the number of hours an inactive entry remains in the list of
adjacent access points
Release Modification
12.2(11)JA This command was introduced.
Command Description
show dot11 adjacent-ap Displays the list of adjacent access points