Specifications

2-88
Cisco IOS Command Reference for Cisco Aironet Access Points and Bridges
0L-24115-01
Chapter 2 Cisco IOS Commands for Access Points and Bridges
description (dot1x credentials configuration mode)
Command History
Examples This example shows how to begin debugging for LEAP-enabled client devices participating in Cisco
Centralized Key Management (CCKM):
AP# debug wlccp ap mn
Related Commands
description (dot1x credentials configuration mode)
Use the description dot1x credentials configuration mode command to specify a text description for
the dot1x credential. Use the no form of the command to disable anonymous-id.
[no] description name
Syntax Description
Defaults This command has no defaults.
Command Modes Dot1x credentials configuration interface
Command History
Examples This example shows how to specify text description for the dot1x credential:
AP(config-dot1x-creden)# description This is a test credential
Related Commands
Release Modification
12.2(11)JA This command was first introduced.
12.2(13)JA This command was modified to include the aggregator and nm options.
Command Description
show debugging Displays all debug settings and the debug packet headers
show wlccp Displays WLCCP information
name Specifies the text description for the dot1x credential.
Release Modification
12.3(8)JA This command was introduced.
Command Description
dot1x credentials Configures the dot1x credentials on the access point.
show dot1x credentials Displays the configured dot1x credentials on the access point.