Installation guide

98
Wi-Fi Location-Based Services—Design and Deployment Considerations
OL-11612-01
RFID Tag Considerations
Figure 70). When this is successfully performed, a yellow tag should appear under “View Filters” (as
indicated in Figure 70), and yellow tags are then used on the floor map to denote the current location of
any detected asset tags.
Figure 70 Enabling Display of Asset Tags on WCS
Configuring Asset Tags
The Cisco LBS solution is based on IEEE 802.11 standards and can interoperate with a variety of
802.11-compatible clients and asset tags. Figure 71 shows the AeroScout Type 2 (T2) 802.11 active
RFID asset tag (shown on left) and the PanGo Networks Version 1 Locator LAN asset tag (shown on
right).