Installation guide

48
Wi-Fi Location-Based Services—Design and Deployment Considerations
OL-11612-01
Installation and Configuration
Figure 27 Default Location Application UserID
This brings up the menu shown in Figure 28, which allows the password to be changed for the admin
userid.
Figure 28 Modifying the Admin Password
Finally, change the value for the password used by WCS to access the location server application to the
new value that was specified in Figure 28. This can be performed via Location Server > Administration
> General Properties, as shown in Figure 29.
Note that any third-party location clients (such as PanGo Locator) that also use the admin userid to
access the location server application via the SOAP/XML API also need to be changed accordingly. You
may prefer to define a totally separate userid for such third-party location clients instead of using the
admin account.