Datasheet

Data Sheet
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 8
Product Specifications
Table 1 lists specifications for the Cisco Aironet 1550 Series.
Table 1. Cisco Aironet 1550 Series Product Specifications
Item
Specification
Part numbers
Cisco Aironet 1552E Access Point
●
AIR-CAP1552E-A-K9
●
AIR-CAP1552E-C-K9
●
AIR-CAP1552E-E-K9
●
AIR-CAP1552E-M-K9
●
AIR-CAP1552E-N-K9
●
AIR-CAP1552E-K-K9
●
AIR-CAP1552E-R-K9
●
AIR-CAP1552E-S-K9
●
AIR-CAP1552E-T-K9
Cisco Aironet 1552C Access Point with DOCSIS 3.0 Cable Modem
●
AIR-CAP1552C-A-K9
●
AIR-CAP1552C-E-K9
●
AIR-CAP1552C-N-K9
Cisco Aironet 1552H Hazardous Location Access Point
●
AIR-CAP1552H-A-K9
●
AIR-CAP1552H-C-K9
●
AIR-CAP1552H-E-K9
●
AIR-CAP1552H-M-K9
●
AIR-CAP1552H-N-K9
●
AIR-CAP1552H-S-K9
Cisco Aironet 1552I Integrated Antenna Access Point
●
AIR-CAP1552I-A-K9
●
AIR-CAP1552I-E-K9
●
AIR-CAP1552I-K-K9
●
AIR-CAP1552I-Q-K9
Cisco SMARTnet
®
Services for the Cisco Aironet 1550 Series Access Points
●
CON-SNT-CAP155Ex - SMARTnet 8x5xNBD 1552E Access Point
●
CON-SNT-CAP155Cx - SMARTnet 8x5xNBD 1552C Access Point with Cable Modem
●
CON-SNT-CAP155Hx - SMARTnet 8x5xNBD 1552H Hazardous Location Access Point
●
CON-SNT-CAP155Ix - SMARTnet 8x5xNBD 1552I Integrated Antenna Access Point
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the
Global Price List.
802.11n Version 2.0 (and
Related) Capabilities
●
2x3 multiple-input multiple-output (MIMO) with two spatial streams
●
Legacy beamforming
●
20- and 40-MHz channels
●
PHY data rates up to 300 Mbps
●
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
●
802.11 dynamic frequency selection (DFS)
●
Cyclic shift diversity (CSD) support
DOCSIS 3.0 Capabilities
DOCSIS 3.0 8x4 cable modem provides:
●
Eight (8) bonded channels with total throughput in excess of 300 Mbps
●
Designed to meet DOCSIS 3.0 specifications as well as backward compability with existing DOCSIS 2.0, 1.1 and
1.0 networks
●
Enhanced packet processing technology to maximize performance
●
Downstream data rates in excess of 320 Mbps
●
Upstream data rates up to 120 Mbps
Channel-bonded cable modems must be used in conjunction with a cable modem termination system (CMTS) that
supports channel bonding per the DOCSIS 3.0 specifications. When used with a non-channel-bonded CMTS,
channel- bonded cable modems function as conventional DOCSIS 2.0 cable modems.
Data Rates Supported
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates (2.4 GHz and 5 GHz):