Datasheet

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com

Page 18 of 20

Item Specification

Remote Configuration

Support

• BOOTP, DHCP, Telnet, HTTP, FTP, TFTP, and SNMP

Dimensions

• 4.1 in. (10.4 cm) wide; 8.1 in. (20.5 cm) high; 1.5 in. (3.8 cm) deep

Weight

• 10.5 oz. (297 g)

Environmental

• 32–104° F (0–40° C)

• 10–90% humidity (noncondensing)

System Memory

• 16 MB RAM

• 8 MB FLASH

Input Power Requirements

• 100–240 VAC 50–0Hz (power supply)

• 33–57 VDC (device)

Power Draw

• 4.9 watts, RMS

Warranty

• One year

Wi-Fi Certification

Table 3. Product System Requirements

Feature System Requirement

Standard 802.1X-compliant user-level

authentication and dynamic encryption keying

One of the following RADIUS servers:

• Cisco Secure Access Control Server Version 3.0 or greater

• Cisco Access Registrar

Version 3.0 or greater

• Funk Software Steel Belted RADIUS Server Version 3.0 or greater

• Interlink Networks RAD-Series RADIUS Server Version 5.1 or greater

CiscoWorks RME/Campus Manager • CiscoWorks LAN Management Solution (LMS) or Routed WAN Solution (RWAN)

Line power over Ethernet support • Cisco AIR-PWRINJ3= Aironet Power Injector for the 1100 and 1200Series

• Cisco AIR-PWRINJ-FIB= Aironet Power Injector Media Converter

• Cisco Catalyst Switch IEEE 802.3af and Pre-Standard Power over Ethernet

• Cisco WS-PWR-PANEL Midspan Power Patch Panel

CISCO SMARTNET SUPPORT AND SMARTNET ONSITE SUPPORT

Operational technical support service for maximizing network availability is offered through Cisco SMARTnet

support and SMARTnet Onsite

support. Cisco SMARTnet support augments the resources of your operations staff; it provides them access to a wealth of expertise, both online and

via telephone; the ability to refresh their system software at will; and a range of hardware advance-replacement options. Cisco SMARTnet Onsite

support provides all SMARTnet services and complements the hardware advance-replacement feature by adding the services of a field engineer,

critical for those locations where staffing is insufficient or unavailable to replace parts.