User guide

10
Chapter 5: Using the Interactive Voice Response Menu
Using the Interactive Voice Response Menu
ADSL2+ Gateway with VoIP
For example, to enter the IP address 191.168.1.105 by keypad, press these keys: 191*168*1*105. Press the #
(pound) key to indicate that you have finished entering the IP address. Then press 1 to save the IP address or
press the * (star) key to cancel your entry and return to the main menu.
If the menu is inactive for more than one minute, the Voice Gateway will time out. You will need to re-enter the
menu by pressing ****.
The settings you have saved will take effect after you have hung up the telephone. The Voice Gateway may reboot
at this time.
Table 1: Interactive Voice Response Menu
Action Command (press these
keys on the telephone)
Choices Description
Enter Interactive Voice
Response Menu
**** Use this command to enter the
Interactive Voice Response
Menu. Do not press any other
keys until you hear, “Linksys
configuration menu. Please
enter the option followed by
the # (pound) key or hang up to
exit.”
Check Internet Connection
Type
100 Hear the Internet connection
type of the Voice Gateway.
Check Internet IP Address 110 Hear the IP address assigned
to the Voice Gateway’s Internet
(external) interface.
Check Network Mask (or
Subnet Mask)
120 Hear the network or subnet
mask assigned to the Voice
Gateway.
Check Gateway IP Address 130 Hear the IP address of the
Voice Gateway (usually the
network router).
Check MAC Address 140 Hear the MAC address of the
Voice Gateway in hexadecimal
string format.
Check Firmware Version 150 Hear the version number of the
firmware currently running on
the Voice Gateway.