Datasheet

Rack-Mounting and Wall-Mounting Cisco 3600 Series Routers and the Cisco Redundant Power System 27
Mounting the RPS in the Rack
Mounting the RPS in the Rack
After the brackets are fastened to the RPS, fasten the RPS to the rack, using your own screws
(Figure 36 and Figure 37).
Figure 36 Mounting the RPS—Rear Panel Forward (19-Inch Rack)
Figure 37 Mounting the RPS—Rear Panel Forward (23- or 24-Inch Rack)
H9699
Note: The second bracket attaches to the rack at the other side of the chassis.
DC OUTPUT 3
DC OUTPUT 4
11008
Note: The second bracket attaches to the rack at the other side of the chassis.
The brackets can also be installed with the front panel forward.
DC OUTPUT 3
DC OUTPUT 4
24-inch rack23-inch rack