Datasheet

Rack-Mounting and Wall-Mounting Cisco 3600 Series Routers and the Cisco Redundant Power System 23
Mounting the Router on the Wall
Step 3 Drill wall-mount screw holes through the plywood board and studs.
Note Plan to mount the router so that the front and rear of the chassis are perpendicular
to the floor, with the front upward and at eye level, so you can read the LEDs.
Step 4 Mount the plywood board to the wall, using your own 3/16 x 2-1/2 inch or larger wood
screws.
Step 5 Using your own screws, approximately #6 x 1/2-inch (depending on the thickness of the
board), fasten the router to the board by the mounting brackets (Figure 30 and Figure 31).
Figure 30 Mounting the Cisco 3620 Router on a Wall
H7614
0
ACTIVE
READY
1
S
Y
S
T
E
M
C
O
N
A
U
X
R
P
S
P
C
M
C
IA
1
0
Wood
screws
Wood screws
19 x 24 in
or larger
plywood
board