Datasheet

22 Rack-Mounting and Wall-Mounting Cisco 3600 Series Routers and the Cisco Redundant Power System
Wall-Mounting the Cisco 3620 and Cisco 3640 Routers
Attaching Brackets to the Router
Attach the brackets to the router as follows:
• If you have a Cisco 3620 router, use the special plastic washers and slotted hex-head screws.
Place the washers so that the narrow shoulder faces the router chassis (Figure 28).
• If you have a Cisco 3640 router, attach the brackets on each side of the chassis (Figure 29).
Figure 28 Wall-Mount Bracket Attachment (Cisco 3620 Router)
Figure 29 Wall-Mount Bracket Attachment (Cisco 3640 Router)
Mounting the Router on the Wall
To mount the router on the wall, follow these steps:
Step 1 Using the brackets as a pattern, mark and drill holes on the board where you will fasten
the router. Do not attach the router to the board yet.
Step 2 Locate the wall studs where you plan to attach the router.
Caution The router must be fastened securely to two studs.
0
ACTIVE
READY
1
PCMCIA
1
0
Note: The second bracket attaches to the other side of the chassis.
H7612
0
ACTIVE
READY
1
2
3
PCMCIA
1
0
H7615
Note: The second bracket attaches to the other side of the chassis.