Specifications

2-921

Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)

OL_28738 -01

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

vtp domain

To configure the administrative domain name for a device, use the vtp domain command.

vtp domain domain-name

Syntax Description

Defaults This command has no default settings.

Command Modes VLAN configurati on mode

Usage Guidelines When you define the domain-name, the domain name is case sensitive and can be from 1 to 32 characters.

You must set a domain name before you can transmit any VTP advertisements.

Even if you do not set a domain name, the device will leave the no-management-domain state upon

receiving the first VTP summary packet on any port that is currently trunking.

If the device receives its domain from a summary packet, it resets its configuration revision number to

zero. Once the device leaves the no-management-domain state, it can never be configured to reenter the

number except by cleaning NVRAM and rel oading.

Examples This example shows how to set the devices administrative domain:

Switch(vlan-config)# vtp domain DomainChandon

Switch(vlan-config)#

Related Commands

domain-name Nam e of the domain.

Command Description

show vtp Displays VTP statistics and domain information.

vtp (global configuration

mode)

Configures the name of a VTP configuration storage file.