Specifications

2-916

Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)

OL_28738 -01

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

vmps retry

To configure the per-server retry c ount for t he VLAN Q uery Pr otocol (VQ P) client, use the vmps retry

command. To return to the default setting, use the no form of this command.

vmps retry count

no vmps retry

Syntax Description

Defaults T he retry count is 3.

Command Modes Global c onfiguratio n mode

Usage Guidelines You can ve rify your setting by ente ring the show vmps command and examining information in the

Server Retry Count row.

Examples This example shows how to set the retry count to 7:

Switch(config)# vmps retry 7

Related Commands

count Number of attempts to contact the VLAN Membership Policy Server (VMPS) by the

client before querying the next server in the list; valid values are from 1 to 10.

Command Description

show vmps Displays the V LAN Query Protocol (VQP) ver sion,

reconfirmation interval, retry count, VLAN Membership Policy

Server (VMPS) IP addresses, current servers, and primary

servers.