Specifications

2-875
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
switchport private-vlan trunk native vlan tag
switchport priva te-vlan trunk native vlan tag
To control the tagging of the native VLAN traffic on 802.1Q private VLAN trunks, use the swit chport
private-vlan trunk nat ive vlan t ag command. To remove the control of tagging (and default to the global
setting), use the no form of this command.
switchport private-vlan trunk native vlan tag
no switchport private-vl an trunk native vlan tag
Syntax Description This command has no arguments or keywords.
Defaults The default setting is global; the settings on the port are determined by the global setting.
Command Modes Interface configur ation mode
Usage Guidelines The configuration created with this command only applies to ports that are configured as private VLAN
trunks.
Examples This example shows how to enable 802.1Q native VL AN tagging on a PVLAN trunk:
Switch(config-if)# switchport private-vlan trunk native vlan tag
Switch(config-if)#
Related Commands Command Description
show interfaces switchport Displays the administrative and operational status of a
switching (nonrouting) port.
switchport mode Enables the interface type.