Specifications

2-845
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
subscribe-to-alert-group inventory
subscribe-to- alert-group inv entory
To subscribe a destination profile to the Inventory alert group, use the
subscribe-to-alert-group inventor y command.
subscribe-to-alert-group inventory [periodic {daily hh:mm | monthly date hh:mm |
weekly day hh:mm}]
Syntax Description
Defaults This command has no default settings.
Command Modes cfg-call-home-profile
Usage Guidelines To enter profile call-home configuration submode, use the profile command in call-home configuration
mode.
The Inventory alert group can be configur ed for periodic notific ation.
Examples This example shows how to configure the Inventory alert group with periodic da ily alert at 21:12":
Switch(config)# call-home
Switch(cfg-call-home)# profile cisco
Switch(cfg-call-home-profile)# subscribe-to-alert-group inventory periodic daily 21:12
Related Commands
periodic (Optional) Specifies a periodic call-home message.
daily hh:mm Sets a daily alert in hours and minutes.
monthly date hh:mm Sets a monthly alert in day, hour, and minute.
weekly day hh:mm Sets a weekly a lert in day, hour, and minutes.
Command Description
destination address Configures the destination e-mail address or URL to which
Call Home messages will be sent.
destination message-size-limit bytes Configures a maximum destination message size for the
destination profile.
destination preferred-msg-format Configures a preferred message format.
destinati on tran sport- method Enables the message transport method.
profile Enters profile call-home configuration submode
subscribe-to-alert-group all Subscribes to all available alert groups.
subscribe-to-alert-group configur ation Subscribes this destination profile to the Configuration
alert gr oup .
subscribe-to-alert-group diag nostic Subscribes this destination profile to the Diagnostic alert
group.