Specifications

2-798
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
snmp-server ifindex persist compress
snmp-server ifi ndex persist compress
To configure the format of the ifIndex table in a compressed format, use the snmp-server ifindex persist
compress command. To place the table in a decompressed format, use the no form of this command.
snmp-server ifindex persist compress
no snmp- serve r ifind ex pe rsist compre ss
Syntax Description This command has no arguments or keywo rds.
Defaults Disabled
Command Modes Global c onfiguratio n mode
Usage Guidelines T his command is hidden because the ifIndex table is always in a compressed format on the supervisor
engine.
Examples This example shows how to enable compression of the ifIndex table:
Router(config)# snmp-server ifindex persist compress
This example shows how to disable compr ession of the ifIndex t able:
Router(config)# no snmp-server ifindex persist compress
Related Commands Command Description
snmp ifindex clear C lears any previously configu red snmp ifindex commands
that were entered for a specific interface.
snmp ifindex persist Enables ifIndex values in the Interfaces MIB (IF-MIB) that
persist across reboots (ifI ndex persistence) on a specific
interface.
snmp-server ifindex persist E nables ifIndex values that will remain constant across
reboots for use by SNMP.