Specifications

2-739
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show pppoe intermediate-agent interface
show pppoe int ermediate-ag ent interface
To display PPPoE Intermediate Agent configuration and statistics (packet counters), use the
show pppoe intermediate-agent interface command.
show ppoe intermediate-agent information interface interface
show ppoe intermediate-agent statistics interface interface
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Examples This example shows how to display PPPoE Intermediate Agent configuration:
Switch# show pppoe intermediate-agent information
Switch PPPoE Intermediate-Agent is enabled
PPPoE Intermediate-Agent trust/rate is configured on the following Interfaces:
Interface IA Trusted Vsa Strip Rate limit (pps)
----------------------- -------- ------- --------- ----------------
GigabitEthernet3/4 no yes yes unlimited
PPPoE Intermediate-Agent is configured on following VLANs:
2-3
GigabitEthernet3/7 no no no unlimited
PPPoE Intermediate-Agent is configured on following VLANs:
2-3
This example shows how to display PPPoE Intermediate Agent statistics on an interface:
Switch# show pppoe intermediate-agent statistics interface g3/7
Interface : GigabitEthernet3/7
Packets received
All = 3
PADI = 0 PADO = 0
PADR = 0 PADS = 0
PADT = 3
Packets dropped:
Rate-limit exceeded = 0
Server responses from untrusted ports = 0
Client requests towards untrusted ports = 0
Malformed PPPoE Discovery packets = 0
Vlan 2: Packets received PADI = 6 PADO = 0 PADR = 6 PADS = 0 PADT = 6
Vlan 3: Packets received PADI = 4 PADO = 0 PADR = 4 PADS = 0 PADT = 4
interfa ce inte rface Interface for which information or statistics are displayed.