Specifications

2-713
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show pagp
show pagp
To display information about the port channel, use the show pagp command.
show pagp [group-numbe r] {counters | dual-active | internal | neighbor}
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Usage Guidelines You can enter any show p agp command to display the active PAgP port-channel information. To display
the nonactive information, enter the show pagp co mmand with a group.
Examples This example shows how to display information about th e PAgP counter:
Switch# show pagp counters
Information Flush
Port Sent Recv Sent Recv
--------------------------------------
Channel group: 1
Fa5/4 2660 2452 0 0
Fa5/5 2676 2453 0 0
Channel group: 2
Fa5/6 289 261 0 0
Fa5/7 290 261 0 0
Switch#
This example shows how to display PAgP dual-active information:
Switch# show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
Channel group 30
Dual-Active Partner Partner Partner
Port Detect Capable Name Port Version
Te3/1 Yes VS1-Reg2 Te1/1/7 1.1
Te4/1 Yes VS1-Reg2 Te2/2/8 1.1
Channel group 32
Dual-Active Partner Partner Partner
Port Detect Capable Name Port Version
Gi1/43 Yes VS3 Gi1/1/43 1.1
group-number (Optional) Channel-group number ; valid values are from 1 to 64.
counter s Specifies the traffic counter information.
dual-active Specifies the dual-active information.
internal Specifies the PAgP internal information.
neighbor Specifi es the PAgP neighbor informatio n.