Specifications

2-19
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
attach module
attach module
To remotely connect to a specific module, use t he attach module configuration com mand.
attach module mod
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Usage Guidelines This command applies only to the Access Gateway Module on Catalyst 4500 series switches.
The valid values for mod depend on the chassis that are used. For example, if you ha ve a Ca talyst 4 506
chassis, valid values for the module are from 2 to 6. If you have a 4507R chassis, valid values are from
3 to 7.
When you execute the attach module mod command, the prompt changes to Gateway#.
This command is identical in the resulting action to the session module mod and the re mote log i n
module mod commands.
Examples This example shows how to remotely log in to an Access Gateway Module:
Switch# attach module 5
Attaching console to module 5
Type 'exit' at the remote prompt to end the session
Gateway>
Related Commands
mod Target module for the command.
Command Description
remote lo gin mod ule Remotely connects to a specific module.
session module Logs in to the st andby supervisor engine using a virtual consol e.