Specifications

2-675
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show mac-address-table count
show mac-add ress-table count
To display the number of entries currently in the MAC address table, use the show mac-address-table
count command.
show mac- addres s-t able c ount [vlan v lan_id]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Examples This example shows how to display the entry count for a specific VLAN:
Switch# show mac-address-table count vlan 1
MAC Entries for Vlan 1:
Dynamic Unicast Address Count: 0
Static Unicast Address (User-defined) Count: 0
Static Unicast Address (System-defined) Count: 1
Total Unicast MAC Addresses In Use: 1
Total Unicast MAC Addresses Available: 32768
Multicast MAC Address Count: 1
Total Multicast MAC Addresses Available: 16384
Switch#
Related Commands
vlan vlan_id (Opt ional) Specifies a VLAN; valid values are from 1 to 4094.
Command Description
show mac-address-table address Displays the information about the MAC-address table.
show mac-address-table aging- time Displays MAC address table aging information.
show mac-address-table dynamic Displays the dynamic MAC address table entries only.
show mac-address-table inter face Displays the MAC address table information for a specific
interface.
show mac-address-table multicast Displays informati on about the multicast MAC address
table.
show mac-address-table protoc ol Displays the MAC address table information that is based
on the protocol.
show mac-address-table static Displays the static MAC address table entries only.
show mac-address-table vlan Displa ys information about t he MAC address table for a
specific VLAN.