Specifications

2-667
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show lacp
Port Flags State Interval Priority Key Key Number State
Fa4/1 saC bndl 30s 32768 100 100 0xc1 0x75
Fa4/2 saC bndl 30s 32768 100 100 0xc2 0x75
Fa4/3 saC bndl 30s 32768 100 100 0xc3 0x75
Fa4/4 saC bndl 30s 32768 100 100 0xc4 0x75
Switch#
Table 2-26 lists the output field definitions .
This example shows how to display LACP neighbo rs information for a sp ecific port channel:
Switch# show lacp 1 neighbor
Flags: S - Device sends PDUs at slow rate. F - Device sends PDUs at fast rate.
A - Device is in Active mode. P - Device is in Passive mode.
Channel group 1 neighbors
Partner Partner
Table 2-26 show lacp internal Command Output Fields
Field Descr iption
State State of the specific port at the current moment is displayed; allowed
values are as follows:
• bndl—Port is attached to an aggregator and bundled with other
ports.
• susp—Port is in a suspended state; it is not attached to any
aggregator.
• indep—Port is in an independent state (not bundled but able to
switch data traffic. In this case, LACP is not running on the partner
port).
• hot-sby—Port is in a hot-standby state.
• down—Port is down.
LACPDUs Interval Interval setting.
LACP Port Priority Port priority setting.
Admin Key A dministrative key.
Oper Key Operator ke y.
Port Number Port number.
Port State State variables for the port encoded as individual bits within a single
octet with the following meaning [1]:
• bit0: LACP_Activity
• bit1: LACP_Timeout
• bit2: Aggregation
• bit3: Synchronization
• bit4: Collecting
• bit5: Distributing
• bit6: Defaulted
• bit7: Expired