Specifications

2-17
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
apply
apply
To implement a new VLAN database, increment the configuration number, save the configuration
number in NVRAM, and propagate the configuration number throughout the administrative domain, use
the apply command.
apply
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes VLAN configurati on mode
Usage Guidelines The apply command implements the configuration changes that you made after you entered VLAN
database mode and uses them f or the runnin g configura tion. This com mand keep s you in VLAN da tabase
mode.
You cannot use this command when the switch is in the VTP client mode.
You can verify that the VLAN database changes occ urred by entering the show vlan command from
privileged EXEC mode.
Examples This example shows how to implement the proposed new VLAN database and to recognize it as the
current database:
Switch(config-vlan)# apply
Switch(config-vlan)#
Related Commands Command Description
exit (refer to Cisco IOS
documentation)
Closes an active terminal session by logging off the switch.
reset Leaves the proposed new VLAN database but remains in VLAN
configuration mode and resets the proposed new database to be
identical to the VLAN database currently implemented.
show vlan Displays VLAN information.
shutdown vlan (refer to Cisco
IOS documentation)
Shuts down VLAN switching.
vtp (global configuration
mode)
Modifies the name of a VTP configuration storage file.