Specifications

2-644
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show ipv6 mld snooping mrouter
show ipv6 mld snooping mrout er
To display dynamically learned and manually configured IP version 6 (IPv6) Multicas t Listener
Discover y (MLD) sw itch po rts fo r the swi tch or a V LAN, use the show ipv6 mld snooping mrouter
command.
show ipv6 mld snooping mr oute r [vl an vlan-id ]
Syntax Description
Command Modes User EXEC mode
Usage Guidelines U se this command to displ ay MLD snooping switch por ts for the switch or for a spe cific VLAN.
VLAN numbers 1002 through 1005 are rese rved for Token Ring and FDDI VLANs and cann ot be used
in MLD snoopi ng.
Examples This is a n example of output from the show ipv6 mld snooping mr outer command. It displays snooping
characteristics for all VLANs on the switc h that are participating in MLD snooping.
Switch> show ipv6 mld snooping mrouter
Vlan ports
---- -----
2 Gi1/0/11(dynamic)
72 Gi1/0/11(dynamic)
200 Gi1/0/11(dynamic)
This is an example of output from the show ipv6 mld sn ooping mrouter vlan co mmand. It shows
multicast switch ports for a specific VLAN.
Switch> show ipv6 mld snooping mrouter vlan 100
Vlan ports
---- -----
2 Gi1/0/11(dynamic)
Related Commands
vlan vlan-id (Optional) Specifies a VLAN; the range is 1 to 1001 and 1006 to 4094.
Command Description
ipv6 mld snooping E nables IP version 6 (IPv6) Multicast Listener Discovery
(MLD) snooping globally or on the specified VLAN.
ipv6 mld snooping vlan Con figures IP version 6 (IPv6) Multicast Listener
Discovery (MLD) snooping param eters on the VLAN
interface.