Specifications

2-641
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show ipv6 snooping counters
show ipv6 sno oping counter s
To display the number of packets dropped per port due to RA Guard, use the show ipv6 s nooping
counter s interface command.
show ipv6 snooping counters interface
Syntax Description
Defaults None
Command Modes Interface mode
Examples This example pr ovides a sample output for the show ipv6 snooping counters command on interface
Gi2/49:
Switch# show ipv6 snooping counters int gi 2/48
Received messages on Gi2/48:
Protocol Protocol message
ICMPv6 RS RA NS NA REDIR CPS CPA
0 0 0 0 0 0 0
Bridged messages from Gi2/48:
Protocol Protocol message
ICMPv6 RS RA NS NA REDIR CPS CPA
0 0 0 0 0 0 0
Dropped messages on Gi2/48:
Feature/Message RS RA NS NA REDIR CPS CPA
Dropped reasons on Gi2/48:
Switch#
Note Only RA (Router Advertisement) and REDIR (Router Redirected packets) counters are supported in
Cisco IOS Release 12.2(54)SG.
Related Commands
interface Specifies the interface.
Command Description
epm access control Configures access control.