Specifications

2-15

Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)

OL_28738-01

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

ancp client server

To set the IP address of the remote ANCP server, use the ancp client server command.

ancp client server ipaddr of server interface interface

Syntax Description

Defaults This command has no default settings.

Command Modes Global configura tion mode

Usage Guidelines The interface can be the direct interface connected towards the ANCP server (if only one) or a loopback

interface if several interfaces are available for connecting to the server and proper routing is set. (An IP

address must be configur ed on this inte rface and it should not be in shutdown sta te.) Alo ng with the ancp

mode client command, the ancp client ser ver c ommand is required in order to activate the ANCP client.

Once you enter this command, the ANCP client tries to connect to the remote server.

Examples This example shows how to indicate to the ANCP client the IP address of the ANCP server it needs to

connect t o:

Switch# ancp client server 10.1.2.31 interface FastEthernet 2/1

Related Commands

ipaddr of server IP address of the ANCP server the client must connect with TCP.

interface Interface to use for the connection.

Command Description

ancp mode client Sets the router to become an ANCP client.